DIY: How to Build a Kamado Grill Table

This week we are going to share how you (and I) can build a DIY grill table. Our very own Ben Rivera in Simpson Strong-Tie Marketing built a DIY grill table for his Kamado grill. He shared some tips with me that I’m going to pass along to you. If that isn’t enough DIY for you, Jen Woodhouse from House of Wood also shares how to build a DIY grill table with free plans.

Kamado Grill

Ben is one of our creative designers at Simpson. Since he lives in SoCal, he likes to take advantage of the nice weather and entertain outdoors. He grills so much that his wife surprised him with a Kamado grill for Father’s Day. He spent time researching Kamado nests online and realized that he could build a custom DIY grill table much less expensively. He used reclaimed wood from some outdoor benches, 4×4 studs and cedar planking. For hardware, Ben used Simpson Strong-Tie® LUC26Z and FB24Z connectors along with wafer-head screwsStrong-Drive® SDW EWP-Ply screws  and Strong-Drive SD Connector screws.

He used the LUC26Z hangers to frame the project, then wood-stained with Minwax Jacobean. The hardware was spray painted with Rust-Oleum Flat Black. Here is a blog post on how to paint the connectors. Ben’s quick tip for painting the fasteners is to push them into a Styrofoamtakeout box and spray them all at once.

He matched the DIY grill table to a custom table he built just for outdoor entertaining.

Black stained table

Great minds must think alike, because Jen Woodhouse just shared how she built her DIY grill table. You can download free building plans for this DIY grill table here.

Kamado Grill Table
Jen Woodhouse’s DIY Kamado Grill Table