LB Joist, Beam, and Purlin Hanger

A44 installation
(A33 similar)

Min Nailing featuring Positive Angle Nailing targets moderate load conditions whereas the Max Nailing generates capacities for higher loads.

  • The unique two level embossment provides added stiffness to the top flange.
  • Made from 14-gauge steel for strength
  • Galvanized for corrosion resistance

For more information click here

  • http://strongtie.com/ Simpson Strong-Tie

    Hi Mike,

    The PF26’s height should be sized correctly for a nominal 2×6, which are typically 5.5” in height. However, if you have a difference of 3/8” in height for your joists, I would recommend using one of our facemount hangers so it’ll give you some flexibility. A light gauge facemount hanger such as the LU26 will be around the same capacity of the PF26. Please feel free to contact us with any additional questions at (800) 999-5099.

    Thank you!